When an anaerobic digester sours, the first and most important task is not to begin recovery; it is to accurately diagnose which microbial pathways have been damaged and to what degree. Rushing into recovery protocols without this diagnosis is one of the most common causes of failed or prolonged restarts.

Why VFA Speciation by GC Matters

The single most informative test during a sour digester assessment is a full VFA speciation profile by gas chromatography (GC), not simply a total VFA or alkalinity measurement. The ratio and absolute concentrations of individual VFAs — acetic, propionic, butyric, isobutyric, valeric, and isovaleric acids, reveal which microbial group has failed and how severely.
A total VFA result tells you something is wrong. GC speciation tells you where the process has broken down and what is still functioning, enabling a targeted recovery strategy rather than generic alkalinity addition and load reduction.

Diagnostic Logic — Reading the VFA Profile

VFA Pattern ObservedPathway ImplicatedSeverity
Acetate dominant; propionate low; total VFA 500–2,000 mg/LAceticlastic methanogenesis inhibited only; acetogens still functioningModerate
Acetate very high (>2,000 mg/L); still dominant VFA speciesAceticlastic methanogenesis severely depletedSevere
Propionate elevated (>500 mg/L); propionic:acetic ratio >0.5Syntrophic acetogenesis of propionate impaired; H₂ partial pressure risingModerate–Severe
Propionic:acetic ratio >1.0Acetogenesis collapsed; hydrogenotrophic methanogens also failingSevere
Butyrate + propionate both >500 mg/L simultaneouslyFull acetogenic pathway breakdown; H₂ partial pressure critically elevatedSevere
Isobutyrate, valeric, isovaleric above baselineFermentation stage dysregulated; amino acid catabolism pathways disruptedSevere / Complex

The Propionic:Acetic Ratio — A Critical Diagnostic Threshold

In a digester that has suffered only aceticlastic methanogen inhibition, the propionic:acetic ratio remains low. Acetate accumulates but propionate does not, because acetogens are still active and converting propionate to acetate (even if methanogens cannot consume it fast enough). When this ratio exceeds 0.5 — and especially when it exceeds 1.0 — it signals that hydrogen partial pressure has risen high enough to thermodynamically block syntrophic propionate oxidation.

A propionic:acetic ratio below 0.3 in a sour digester typically indicates methanogenic failure only — a difficult but manageable recovery. Above 0.5, acetogenesis is compromised. Above 1.0, the acetogenic pathway has effectively collapsed and recovery will require weeks, not days.

Supporting Parameters — Full Diagnostic Framework

ParameterMethodResult PatternPathway ImplicatedSeverity
Acetic acidGC-FID500–2,000 mg/L; dominant VFAAceticlastic methanogenesis inhibitedModerate
Acetic acidGC-FID>2,000 mg/L; dominantAceticlastic methanogenesis severely depletedSevere
Propionic acidGC-FID>500 mg/L; ratio >0.5Syntrophic acetogenesis impairedModerate–Severe
Propionic acidGC-FID>1,500 mg/L; ratio >1.0Acetogenesis collapsed; H₂-trophic methanogens failingSevere
Butyric acidGC-FIDMildly elevated + acetateEarly-stage acetogenic inhibitionMild–Moderate
Butyric + propionic both >500GC-FIDBoth simultaneously elevatedFull acetogenic pathway breakdownSevere
Isobutyric / valeric / isovalericGC-FIDAbove baselineFermentation stage dysregulatedSevere / Complex
Biogas CH₄ contentGas analyser<50% (normal 60–70%)Active methanogenesis suppressedModerate–Severe
Biogas CH₄ contentGas analyser<30% or CO₂ dominantMethanogenesis near collapseCritical
FOS/TAC ratioTitration>0.4Imbalance; instability warningModerate
FOS/TAC ratioTitration>0.8Severe imbalance; active distressSevere
H₂ partial pressureH₂ probe / GC>10−4 atmAcetogenesis thermodynamically unfavourableSevere

The Acetogenesis Bottleneck — A Frequently Missed Complication

Acetogens can only convert propionate and butyrate to acetate and hydrogen when hydrogen partial pressure is kept very low — a condition maintained by hydrogenotrophic methanogens. When methanogenic activity is suppressed, hydrogen accumulates and acetogenesis becomes thermodynamically unfavourable regardless of acetogen population size.
During recovery, even as aceticlastic methanogenesis begins to partially recover and acetate consumption resumes, propionate and butyrate continue to accumulate if hydrogenotrophic methanogen activity remains insufficient. The effluent VFA profile characteristically shifts from acetate-dominated to propionate- and butyrate-dominated — a clear indicator that the system is in combined acetogenic and methanogenic distress, and that recovery will take longer than a simple methanogen reactivation timeline would suggest.

What Operators Should Do

  • Monitor VFA speciation where possible.
  • Trend propionic acid separately.
  • Interpret pH together with alkalinity and methane.
  • Avoid aggressive loading increases during stress.
  • Investigate declining methane percentage immediately.

References

  • Ahring, B.K., Sandberg, M., & Angelidaki, I. (1995). Volatile fatty acids as indicators of process imbalance in anaerobic digestors. Applied Microbiology and Biotechnology, 43(3), 559–565.
  • Pullammanappallil, P.C. et al. (2001). Stable performance of anaerobic digestion in the presence of a high concentration of propionic acid. Bioresource Technology, 78(2), 165–169.
  • Batstone, D.J. et al. (2002). Anaerobic Digestion Model No. 1 (ADM1). IWA Publishing, London.
  • Lossie, U. & Pütz, P. (2008). Targeted control of biogas plants with the help of FOS/TAC. Practice Report, Hach-Lange GmbH.
  • Boe, K. et al. (2010). Online headspace chromatographic method for measuring VFAs in anaerobic digesters. Water Science & Technology, 61(11), 2729–2736.
  • Green Pulse™ Anaerobic Treatment Module — Internal Technical Documentation (2024).